R3V/9J R5V/15J R8V/25J

High Power Banded Belts

R3V/9J-R5V/15J-R8V/25J are available

BINLONG Banded belts can be made by joining either Deep Wedge Narrow belts. Each band may contain the specified number of belts. We recommended maximum of five belts in one tie-band.

Features:

•  Enhanced power transmission capacity
•  High adhesion strength between tie-band and the belts
•  Eliminates changes of mismatch in length
•  Antistatic, oil and heat resistant
•  Manufactured through single-stage curing process

Applications:

Banded belts are recommended under following conditions
•  Severe vibrations
•  Vertical shaft drives
•  V-flat drives
•  Agricultural drives
•  Conveyer systems
•  Stone crushers, reciprocating compressors, generator sets, pumps cold forging machine etc

All BINLONG Banded belts are high power belts. While using these belts it is always recommended to use standard pulleys with a proper guard. Appropriate belt sitting can only be obtained if the pitch maintained for the belts and that of pulleys is the same. We recommend that the customer should get back to us with details before using banded belts to enable us to provide the best solution. Improper design using banded belts can lead to premature failure of the drive system.

Standards, Dimensions & Product Range:

The standard length designation for Narrow belts is as follows: Belt number / 10 = Outside length in inches. For example: R5V 950 means 950 / 10= 95 inches outside length

Section

Top Width

Thickness

Angle

(mm)

(mm)

(Deg)

3V/9J

9.7

10

40

5V/15J

15.8

16

40

8V/25J

25.4

25

40

maison | À propos de nous | Courroies Industrielles | Courroies Agricoles | Courroies Automobil | PU courroie | Autres Belt | demande en ligne | Contactez nous