XPZ XPA XPB XPC

Wedge Raw Edge Cogged Belts

Wedge belts have been the result of a continuous thrust by the manufacturers and users on higher power transmissions with reduced space requirements. Wedge belts can transmit higher power to the extent of 1.5 to 2 times the classical belts with the same top width. This has been achieved by dimensional changes, apart from better cord construction used and the optimum placement of the cord line which provides the best support to the cord while in motion. During manufacturing we pre-stretch the cord before building into the belt. It offers lower stretch properties in the drive. This way we are able to reduce minimum installation and take up allowances significantly. For the efficient performance of wedge drive it is essential that the proper tension be maintained in the drive, failure to maintain the same will render the purpose of wedge belts ineffective.

Features:
•  Oil resistant and antistatic
•  Maximum recommended belt speed is 30 m/s
•  High power transmission capacity than wrap belts
•  Superior transverse stiffness & high wear resistance
•  Suitable for drives with small pulley diameters, high
__ ambient temperature and speed
•  Temperature range: -25oC to +100oC

Applications:

General industrial and engineering drives

Standards, Dimensions & Product Range:

We manufacture the entire range of wedge belts. The nominal length for XP wedge belts is designated as pitch length (Lp) in millimeter

Section

Top Width

Thickness

Angle

(mm)

(mm)

(Deg)

XPZ

9.5

8

40

XPA

12.7

10

40

XPB

16.3

13

40

XPC

22

18

40

Home | About Us | Industrial Belts | Agricultural Belts | Automotive Belts | PU Timing Belts | Other Belts | Inquiry Online | Contact Us